B2105 Lotus Auto Trouble Code
Parts or components should not be replaced with reference to only a B2105 Lotus DTC. The vehicle service manual should be consulted for more information on possible causes of the fault, along with required testing.
The problem is caused by the variable cylinder management system switching on and off during light throttle conditions, at cruising speeds, or when driving on flat roads. The constant switching causes excessive oil consumption and the trouble codes appear when oil pressure drops to the point where it can no longer operate the VCM system.
B2105 Lotus Possible Solution:
Gasoline engines use spark plugs to cause an explosion of fuel within the cylinder. In a properly timed engine, this explosion occurs at the proper moment to send the piston to the bottom of the cylinder and provide power to the drive shaft. If the plug wires are out of sequence, the explosion occurs at the wrong time. The improper timing of the explosion sometimes pushes the cylinder the wrong direction or interferes with the turning of the crank. As a result, the engine stutters or backfires, if it runs at all.
B2105 Lotus Description For All Models :
- Lotus 11
- Lotus 16
- Lotus 25
- Lotus 2-eleven
- Lotus 33
- Lotus 340
- Lotus 49
- Lotus 72
- Lotus 79
- Lotus Carlton
- Lotus Eclat
- Lotus Elan
- Lotus Elise
- Lotus Elise 111r
- Lotus Elise S2 111s
- Lotus Elise S3
- Lotus Elise Sc
- Lotus Elite
- Lotus Emme
- Lotus Esprit
- Lotus Etna
- Lotus Europa
- Lotus Evora
- Lotus Excel
- Lotus Exige
- Lotus Exige S3
- Lotus Extreme
- Lotus Gt
- Lotus M
- Lotus Seven
- Lotus Super
- Lotus Xi
|
B2105 Lotus Trouble Repair :
B2105 Lotus code shows that location the body harness connector, located in and around the left hand kick panel area or inside the IP (consult a shop manual for location). Water can leak into the connector from clogged sunroof drains, A-pillar leaks, or windshield or cowling leaks. |
Code Search
Please fill the search bar to find Auto Trouble Code meaning.